ferrous material
英 [ˈferəs məˈtɪəriəl]
美 [ˈferəs məˈtɪriəl]
黑色金属材料；钢铁材料
双语例句
- The principle materials used for tools can be divided into three major categories: ferrous material, nonferrous material, and nonmetallic material.
用来做工具的主要材料可以被分为三大类：黑色金属材料，有色金属材料，非金属材料。 - Recommended for light to medium severity drawing, rolling stamping applications on ferrous non ferrous material including aluminum and steel.
建议使用于黑色金属和有色金属的轻到中度拉伸、压延和冲孔加工。 - Very low viscosity oil for punching stamping of ferrous non ferrous material.
极低粘度金属加工油，适合黑色金属和有色金属的冲孔和冲压加工。 - In accordance with ferrous ammonium sulfate in water samples to calculate the amount of material to restore the volume of oxygen consumption, which was potassium dichromate titration reflux.
根据硫酸亚铁铵的用量算出水样还原性物质消耗氧的量，这就是重铬酸钾回流滴定法。 - Case Hardened: a case hardened fastener is a fastener of ferrous material having a surface which has been made harder than the core.
表面硬化：表面硬化的紧固件是黑色金属，其表面经过处理后比内心硬度要高。 - A fine sand is coated and fired upon a mounted pattern made of ferrous or aluminum material. Research on Coating Process for Cold-mould of Centrifugal Casting Cast Iron Roller
一颗好的细砂是由一块模板涂层并炮击后形成的，而这模板是由亚铁或者铝质材料制成。离心铸铁轧辊冷型涂料涂敷工艺研究 - The research works on treating comprehensive waste water ( including black liquor) with polymerized ferrous sulfate as flocculant aid in paper making industry whose material is straw is reported.
利用聚合硫酸铁复合助凝剂处理以稻草为原料的造纸综合废水（包括黑液）。 - Study on Use of A Porous Ferrous Filter Material for Chromium Removal
铁质多孔滤料除铬研究 - Effects of Cerium on Alloy Elements Distribution in Ferrous Matrix Material
铈对铁基烧结制品中合金元素分布的影响研究 - Properties of ferrous based material prepared by warm compacting and sintering Investigation on Warm Compaction Technology for Powder Metallurgy of Iron Base Materials
铁基温压烧结材料性能铁基粉末冶金材料的温压工艺 - Some concept about screening and washing installation for quartz, handling for reducing agent, proper use of ferrous material, burden mixing and transportation are presented.
对硅石筛选和水洗的设置，还原剂的处理，含铁原料的正确使用和入炉料的混合配比及原料的运输设计等都提出了见解。 - Ferrous sulphate is a wide used product of chemical industry, which was produced with waste iron as raw material in the past so that its cost was higher.
硫酸亚铁是一种用途广泛的化工产品，过去系采用废铁作原料进行生产，但成本较高。 - The degree of SD of ferrous material industry in Chongqing City was higher than that in Gansu Province.
重庆市黑色金属材料工业的可持续发展水平高于甘肃省黑色金属材料工业的可持续发展水平。 - Most of the pneumoconiosis patients reported were from coal, metallurgy, non ferrous metal, hydroelectric engineering and architectural material industries.
广西尘肺病主要分布在煤炭、冶金及有色金属、水电工程和建筑材料行业； - In this paper, using ferrous sulfate ( a by-product of titanium white) as raw material and sodium carbonate as precipitant, air as oxidative, the precipitate after being heat treatment, is right the ferric oxide pigment.
本文利用钛白粉生产过程的副产物硫酸亚铁作原料，经净化处理后，所得沉淀物再经热处理，即得到氧化铁颜料。 - Glass-ceramics were prepared from ferrous tailing as the main raw material. The effect of crystallizing temperature/ time on the microstructure of glass-ceramics was investigated comprehensively by DTA, XRD and SEM.
以铁尾矿为主要原料制备微晶玻璃，通过DTA，XRD，SEM分析方法，全面考察了晶化温度和晶化时间对微晶玻璃结构的影响。 - This article talks about how to make polymer iron sulfate flocculant by using ferrous sulfate as raw material through hydrogen peroxide one-shot oxidization, focusing on reflection principle and method of new technological process, physical and chemical properties and application in waste water treatment.
以硫酸亚铁为原料，采用过氧化氢一步氧化法制备聚合硫酸铁絮凝剂。研究了新工艺的反应原理、方法，产品的物理化学性能以及该产品在废水处理中的应用。 - Among the material industries in Gansu Province, the degree of SD of ferrous material industry was the lowest, the degree of SD of metal products industry was the highest.
甘肃省材料工业中以黑色金属材料工业的可持续发展水平最低，金属材料制品业的可持续发展水平最高； - The crystal structure and electrochemical performance of the material were studied by XRD, SEM and AC impedance. The effects of soft templates such as dextrose, acrylamide and ferrous lactate, on the performance of the material were studied.
通过XRD、SEM以及交流阻抗等对材料的晶体结构和电化学性能进行研究，并研究了葡萄糖、丙烯酰胺和乳酸亚铁作为软模板剂对材料性能的影响。 - Therefore, how to make high speed machining technology apply to ferrous metals and difficult-to-machine material becomes the technical problem to be solved.
因此，如何快速将高速切削技术应用到黑色金属及难加工材料的加工上来成为亟待解决的技术难题。